A Finite Element Investigation into the Impact Performance of an Open-Face Motorcycle Helmet with Ventilation Slots

A Finite Element Investigation into the Impact Performance of an Open-Face Motorcycle Helmet with Ventilation Slots

Blog Article

Motorcycle helmets are essential for reducing the risk of head injuries in the event of an impact.However, during L-LYSINE the design of helmets, a compromise must be made between user safety and user comfort.Accordingly, the present study proposes a novel open-face helmet design, in which the helmet features three ventilation slots in the upper-head region.

Finite element analysis (FEA) models were constructed for both a prototype helmet design, and three traditional helmet designs (full-face, open-face, and half-face helmets).In simulating the proposed open-face helmet, this study considered three different ventilation slot widths, namely 8, 14, and 18 mm.The simulation results showed that of all the helmet designs, the half-face helmet resulted in the greatest headform acceleration Horse Saddle Pads (303 G).

The internal ventilation helmet achieved a lower peak acceleration than that of the full-face helmet.By contrast, the proposed open-face helmet with ventilation slots resulted in the lowest acceleration, irrespective of the ventilation slot width.The 8-mm ventilation slot width resulted in the optimal impact performance level (i.

e., a peak headform acceleration of 160 G).Overall, the results suggest that the proposed open-face helmet design with ventilation slots provides a promising solution for ensuring both user protection and user comfort in warm climates.